Optika Italy SZR Serie Manual De Instrucciones página 11

16. Insert the other one end of the light guide into the light source.
(Fig. 9)
17. Tighten the fixing screw ⑪.
18. Plug the power cable ⑫ from the light source in the socket ⑬
in the fluorescence control box. (Fig. 10)
19. Plug the jack of the fluorescence power supply ⑭ in the
socket of the fluorescence control box. (Fig. 11)
20. Connect the power cord.
21. Plug the jack of the microscope power supply in the socket of
the microscope base.
• Before connecting the power supplies make sure that all
switches are in OFF position.
⑪
⑬
Page 11
⑫
⑭
F ig. 9 F ig. 9
F ig. 10 F ig. 10
F ig. 11 F ig. 11