Metabo HPT C 3606DPA Instrucciones De Seguridad Y Manual De Instrucciones página 6

English
4. ALWAYS wear ear protectors when using the tool
for extended periods.
Prolonged exposure to high intensity
noise can cause hearing loss.
5. ALWAYS wear eye protection that meets the
requirement of the latest revision of ANSI
Standard Z87.1.
6. ALWAYS wear a mask or respirator to protect
yourself from dust or potentially harmful particles
generated during operation.
7. Do not reduce the speed of the saw blade by pressing
on the sides.
8. The movable motor section must move freely,
automatically, easily and exactly back into its end
position. It must not be clamped in place for sawing.
9. When sawing materials that generate large quantities
of dust, the machine must be cleaned regularly. Make
sure that the safety appliances, e.g. the movable
motor section, are in perfect working order.
10. If the saw blade blocks, turn the motor off immediately.
11. Do not try to saw extremely small workpieces.
12. Clean gummy or glue-contaminated saw blades.
Contaminated saw blades cause increased friction,
jamming of the saw blade and increase the risk of
back-kicks.
13. Avoid overheating of the saw tooth tips. Avoid
melting of the material when sawing plastic.
Use a saw blade that is suitable for the material being
sawn.
14. Never touch moving parts.
Never place your hands, fi ngers or other body parts
near the tool's moving parts.
6
Fig. 3
15. Never operate without guard in place.
Never operate this tool without guard or safety features
in place and in proper working order. If maintenance
or servicing requires the removal of a guard or safety
feature, be sure to replace the guard or safety feature
before resuming operation of the tool.
16. Use right tool.
Don't force small tool or attachment to do the job of a
heavy-duty tool.
Don't use tool for purpose not intended —for
example— don't use circular saw for cutting tree
limbs or logs.
17. Never use a power tool for applications other
than those specifi ed.
Never use a power tool for applications other than
those specifi ed in the Instruction Manual.
18. Handle tool correctly.
Operate the tool according to the instructions provided
herein. Do not drop or throw the tool. Never allow the
tool to be operated by children, individuals unfamiliar
with its operation or unauthorized personnel.
19. Defi nitions for symbols.
V .................volts
— .................direct current
n
o ................no load speed
---/min ..........revolutions or reciprocation per minute
Hz ................hertz
A ..................amperes
20. Do not run the saw while carrying it at your side.
21. Keep all screws, bolts and covers tightly in place.
Keep all screws, bolts, and plates tightly mounted.
Check their condition periodically.
22. Do not use power tools if the plastic housing or
handle is cracked.
Cracks in the tool's housing or handle can lead to
electric shock. Such tools should not be used until
repaired.
23. Blades and accessories must be securely
mounted to the tool.
Prevent potential injuries to yourself or others. Blades,
cutting implements and accessories which have been
mounted to the tool should be secure and tight.
24. Never use a tool which is defective or operating
abnormally.
If the tool appears to be operating unusually, making
strange noises, or otherwise appears defective, stop
using it immediately and arrange for repairs by a
metabo HPT authorized service center.
25. Carefully handle power tools.
Should a power tool be dropped or struck against
hard materials inadvertently, it may be deformed,
cracked, or damaged.