HIGH ONE 10S49 E W701T Instrucciones De Uso página 15

B
Using the appliance
3. Tablet Option Button
It is used for selection for tablat option. If tablet option is activated, tablet lamp turns on.
Select the Tablet Detergent option when using a combined detergent that contains salt, rinse
aid or other extras. The Tablet Detergent Indicator will remain on for as long as it is selected.
4. Half Load Button
Thanks to the half load function in your machine, you can shorten the durations of the
programmes that you have selected and reduce the energy and water consumption by using
half load electricity and water.
5. Delay Button
It is used for activation of delay timer. When it is pushed once, 3h timer is activated. 6h and 9h
delay timer is activated during consecutive pushes, respectively. If both delay leds are active,
it means that 9h delay timer is active.
6. Child Lock Feature Led
This feature is activated by pressing both tablet and delay timer buttons at the same time during
3 seconds. If any button is pushed when the child lock feature is active, child lock led blinks.
7. Start/Pause Key
When you press the Start/Pause key, the programme you have selected with the programme
selection button will start operating and the washing light will be on.
8. Programme Monitoring Lights
You can monitor the programme flow with the programme lights on the control panel.
• Wash
• Dry
• End
9. Salt Missing Warning Indicator
Check the salt missing warning indicator light on the display to have an idea whether the
softening salt in your machine is enough. When the salt missing warning indicator is lit, fill
the salt compartment.
26 EN
B
Using the appliance
10. Rinse Aid Missing Warning Indicator
Check the rinse aid missing warning indicator light on the display to have an idea whether
the amount of the rinse aid in your machine is enough. When the rinse aid missing warning
indicator is lit, fill the rinse aid compartment.
Changing a Programme
Follow the steps below to change a programme while in operation.
After the programme stops,
select a new programme
using the Programme
Selection Up/Down buttons.
Press the Start/Pause
button to start the newly
selected programme.
27
Press the Start/
Pause button.
9h
3h 6h
9h
3h 6h
The new programme will
resume the course of the old
programme.
9h
3h 6h
EN