Safety - MedLinket AM801 Manual Del Usuario

2) There are nine display modes for your choice, See Figure 7. Figure 7.①-
Figure 7.⑧ display SpO2 and pulse rate, Figure 7. ⑨ display SpO2, pulse rate
and temperature.
97
%SpO
2
①
%SpO
2
④
⑦

Safety

1) Safety
Instructions for safe operations
● Check the main unit and all accessories periodically to make sure that there is no
visible damage that may affect patient's safety and monitoring performance. It is
recommended that the device should be inspected once a week at least. Please stop
using the device when there is obvious damage.
● Necessary maintenance must be performed by qualified service engineers
ONLY. Users are not permitted to maintain it by themselves.
● The oximeter cannot be used together with devices not specified in User's
Manual. Please use the device recommended by Manufacturer.
● Please remove the finger from the instrument to stop measure and pull the acces-
sories from the instrument, then the PULSE OXIMETER will power off automatically
within 8 seconds if the instrument must be closed for the urgent status.
2) Warnings
● Explosive hazard—DO NOT use the oximeter in environment with inflammable gas
such as some ignitable anesthetic agents.
● DO NOT use the oximeter while the testee is under measurement of MRI and CT.
● Be cautious of the cable. Please do not break the cable during usage to avoid
device damage. Please don't use cable if allergic to cable.
● Please don't use this product if you are allergic to silicone pad and ABS plastic.
● Please dispose the device, accessory and packing (including plastic bag, foam and
carton) according to local law.
75
%SpO
BPM
2
BPM
English 14
BPM
②
⑤
36.7
⑧
Figure 7
97
75
%SpO
BPM
2
③
⑥
℃
97
%SpO
2
75
BPm
TEMP
⑨