MedLinket AM801 Manual Del Usuario página 16

Setting enter
Long press the button to enter the
interface of settings.
The setting interface of PULSE OXIME-
TER includes " Setup 1", " Setup 2" and
"Sounds Setup".
Setting enter
and exit
Exit PULSE OXIMETER setting interface
● Short press the button, move the
cursor to select the item of "Exit", long
press the button to return to the POST
display.
"prompt" on or off setting
● Short press the menu button to enter
the interface of settings of "Setup 1".
Move the cursor to select the item of
"prompt", and then long press the button
"prompt" on
to turn the functions on or off.
or off setting
● Short press the button, move the
cursor to select the item of "Exit", and
then long press the button to return to
the POST display.
"Beep" on or off setting
Short press the button, move the cursor
"Beep" on or
to select the item of "Beep", and then
off setting
long press the button to turn the func-
tions on or off.
Default setting
Short press the button, move the cursor
to select the item of "Restore", then long
press the button to return the PULSE
Default
OXIMETER to factory default setting.
setting
After completing the setting, the inter-
face will indicate "OK".
Move the cursor to select the item of
"Exit" by short press the button, and
then long press the button to return to
the POST display.
SpO
Long press the button to enter the
interface of settings of "Setup 2". Short
press the button, move the cursor to
SpO High
2
Limit setting
select the item of "SpO
the button to adjust the parameter of
SpO
The default upper limit is 100%.
High Limit setting
2
2
in the scope of 52% to 100%.
2
English 16
Hi", long press
settings
Setup 1
Prompt
Beep
Power o
＊
Restore
Exit
settings
Setup 1
＊
Prompt
Beep
Power o
Restore
Exit
settings
Setup 1
Prompt
＊
Beep
Power o
Restore
Exit
settings
Setup 1
Prompt
Beep
Power o
Restore
＊
Exit
settings
Setup 1
Prompt
Beep
Power o
Restore
＊
Exit
settings
Setup 2
SpO2 Hi
＊
SpO2 Lo
PR Hi
PR Lo
+/-
Exit
on
o
ok
on
o
ok
on
o
ok
on
on
on
o
ok
100
94
130
50
+