English
13.2 Checking the Blade
► Switch off the mower, remove the activation key and
battery.
► Stand the mower on end.
► Measure the following:
– Thickness 'a'
– Width 'b'
– Sharpening angle 'c'
► If the minimum thickness and minimum width are outside
the specified limits: Replace the blade, @ 22.2.
► If the filing angle is not correct: Sharpen the blade,
@ 22.2.
► If you have any queries: Contact a STIHL servicing dealer
for assistance.
13.3 Testing the Battery
► Press button on battery.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use the battery
and contact your STIHL servicing dealer.
There is a malfunction in the battery.
22
14 Operating the Lawn Mower
14.1 Holding and Controlling the Mower
b
a
c
► Hold the handle firmly with both hands and wrap your
thumbs around the handle.
14.2 Adjusting Cutting Height
Eight cutting heights can be selected to suit the application:
– 25 mm = Position 1
– 33 mm = Position 2
– 43 mm = Position 3
– 52 mm = Position 4
– 63 mm = Position 5
– 75 mm = Position 6
– 87 mm = Position 7
– 100 mm = Position 8
14 Operating the Lawn Mower
0458-819-9921-A