Descargar Imprimir esta página

Folding The Handlebar; Starting And Stopping The Engine; Checking The Lawn Mower; Checking The Controls - Stihl RM 443 Manual De Instrucciones

Ocultar thumbs Ver también para RM 443:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
English
► Fold up handlebar (1), ensuring that cable (2)
is not trapped.
► Screw in quick-clamping devices (3).
► Close quick-clamping devices (3) in the direc‐
tion of handlebar (1).
Handlebar (1) is firmly attached to the lawn
mower and quick-clamping devices (3) lie flat
against handlebar (1).
► Press control bar for mowing (4) to handle‐
bar (1) and hold.
► Slowly pull starter handle (5) in the direction of
starter rope guide (6).
► Hook starter handle (5) into starter rope
guide (6).
► Release control bar for mowing (4).
► Re-attach the spark plug socket.
8.2

Folding the Handlebar

The handlebar can be folded for space-saving
transport or storage.
► Stop the engine.
► Detach the spark plug socket.
► Place the lawn mower on a level surface.
► Press the control bar for mowing to the han‐
dlebar and hold.
28

9 Starting and Stopping the Engine

► Detach the starter handle from the starter rope
guide and slowly guide back towards the
engine.
► Release the control bar for mowing.
► Hold the handlebar and open the quick-clamp‐
ing devices.
► Fold down the handlebar forwards.
9
Starting and Stopping the
Engine
9.1
Starting the Engine
► Place the lawn mower on a level surface.
► Press control bar for mowing (1) to handle‐
bar (2) with the left hand and hold.
► Slowly pull out starter handle (3) to the point of
noticeable resistance with the right hand.
► Keep quickly pulling out and returning starter
handle (3) until the engine is running.
► If the engine does not start: see the engine
instruction manual.
9.2
Stopping the Engine
► Place the lawn mower on a level surface.
► Release the control bar for mowing.
The engine stops.
► Leave the user position.

10 Checking the Lawn Mower

10.1

Checking the Controls

Control bar for mowing
► Stop the engine.
► Pull the control bar for mowing fully in the
direction of the handlebar and release again.
► If the control bar for mowing is stiff or does not
spring back into the initial position: do not use
the lawn mower and consult a STIHL special‐
ist dealer.
The control bar for mowing is defective.
10.2

Checking the Blade

► Stop the engine.
► Detach the spark plug socket.
► Upend the lawn mower,
15.1.
0478-111-9950-A

Publicidad

loading