Finish Cooking; Using The Boost Function - Infiniton FLEXI AREA IND-FFT2 Manual De Instrucciones

3.3.2 Finish cooking

Touching the heating zone selection control that
you wish to switch off.
Turn the cooking zone off by touching the slider
to " ". Make sure the display shows "0".
Turn the whole cooktop off by touching the
ON/OFF control.
Beware of hot surfaces
H will show which cooking zone is hot to
touch. It will disappear when the surface has
cooled down to a safe temperature. It can
also be used as an energy saving function if
you want to heat further pans, use the
hotplate that is still hot.

3.3.3 Using the Boost function

Touching the heating zone slider control
Touching the slider to the right end . Make sure
the display shows "P".
Touching the heating zone slider control that
you wish to cancel the boost function.
Turn the cooking zone off by touching the slider
to " ". Make sure the display shows "0".
Activate the boost function
Cancel the Boost function
12