AEG I84AV423FB Manual De Instrucciones página 57

If there is any residual heat (
/ ) on the cooking zone
you want to use, an acoustic
signal is emitted and the function
does not start.
1. Touch to activate the hob.
2. Touch to activate the function.
A blinking appears for cooking zones
on which you can presently use the
function.
3. Touch the control bar of any available
cooking zone for which you want to start
the function (between the heat setting
1-14).
The function starts.
If you do not choose any cooking zone within
5 seconds the function does not activate.
Once the function starts the
indicators above the
come on one after another until
the water reaches the boiling
point.
When the function detects the boiling point
the hob emits an acoustic signal and the heat
level automatically changes to 8.
If all cooking zones are already
in use or there is some residual
heat on all of them, the hob
emits a beep sound, the
indicators above
the function does not start.
To deactivate the function touch
function deactivates and the heat setting
goes down to 0) or touch the control bar and
adjust the heat setting manually.
6.10 Timer
• Count Down Timer
You can use this function to set the length of
a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
/
symbol
blink and
(the
To activate the function: touch
timer to set the time (00 - 99 minutes). When
the indicator of the cooking zone starts to
flash, the time counts down.
To see the remaining time: touch
the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To change the time: touch
cooking zone. Touch
To deactivate the function: touch
the cooking zone and then touch
remaining time counts down to 00. The
indicator of the cooking zone disappears.
When the countdown ends, an
acoustic signal sounds and 00
flashes. The cooking zone
deactivates.
To stop the sound: touch
• CountUp Timer
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function: touch
timer. appears. When the indicator of the
cooking zone starts to flash, the time counts
up. The display switches between
counted time (in minutes).
To see how long the cooking zone
operates: touch
The indicator of the cooking zone starts to
flash. The display shows how long the zone
operates.
To deactivate the function: touch
then touch or
cooking zone disappears.
• Minute Minder
You can use this function when the hob is
activated and the cooking zones do not
operate. The heat setting display shows
of the
to set
to set the
or .
to set
. The
.
of the
and the
to set the cooking zone.
and
. The indicator of the
ENGLISH
.
57