Precautions And Safety Measures; Preliminary Instructions; During Use; After Use - HT HT2236 Manual De Instrucciones

1. PRECAUTIONS AND SAFETY MEASURES

The instrument has been designed in compliance with the safety directives relevant to
electronic measuring instruments. In order to prevent damaging the instrument, please
carefully follow the procedures described in this manual and read all notes preceded by
the symbol with the utmost attention. Before and after carrying out the measurements,
carefully observe the following instructions:
• Do not carry out any measurements in case gas, explosive materials or flammables are
present, or in dusty environments
• Do not carry out any measurement in case you find anomalies such as deformation,
breaks, substance leaks, absence of display on the screen, etc.
If the instrument is used in a different way than specified in this user manual,
the protections provided for it could be compromised.
When this symbol is displayed, the instrument is radiating the laser. Always
prevent the laser from radiating to your eyes. Class 2 laser apparatus
according to EN 60825-1.
1.1.

PRELIMINARY INSTRUCTIONS

• Only the accessories supplied with the instrument guarantee compliance with the
safety standards. They must be in good conditions and must be replaced, if necessary,
with identical models.
• Do not carry out any measurement under conditions beyond the specifications in § 7.
• Check that battery has been installed correctly.
1.2.

DURING USE

Carefully read the following recommendations and instructions:
• Non-compliance with the Warnings and/or Instructions given in this manual
may damage the instrument and/or its components or injure the operator.
• If the symbol "
battery following the procedure described under § 6.2.
1.3.

AFTER USE

• Remove the battery when the instrument remains unused for a long time.
CAUTION
CAUTION
CAUTION
" is displayed during use, stop testing and replace the
EN - 2
HT2236