BFT GIOTTO BT A ULTRA 36 Instrucciones De Uso Y De Instalacion página 31

Ocultar thumbs Ver también para GIOTTO BT A ULTRA 36:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
Parameter
min.
max.
Default
20
80
Op. speed
20
80
cl speed
0
250
aintenance
(*) In the European Union, apply standard EN 12453 for force limitations, and standard EN 12445 for measuring method.
(**) Impact forces can be reduced by using deformable edges.
(***)=Reference for universal handheld programmer.
TABLE "B"  LOGIC  LOGIC
Logic
Denition
Spring type or bar
otor type
length
Automatic Closing
TCA
Time
Fast closing
FAST CLS.
STEP-BY-STEP
Step-by-step
movement
OVE NT
Pre-alarm
PRE-ALAR
Deadman
HOLD-TO-RUN
Block pulses during
IBL OPEN
opening
Block pulses during
* I BL TCA
TCA
Block pulses during
IBL CLOSE
closing
OPEN IN OTHER
Open in other
direction
DIRECT.
Conguration of
safety input SAFE 1.
SAFE 1
72
Conguration of
safety input SAFE 2.
SAFE 2
74
Personal
Denition
45
Speed during opening
45
Speed during closing
Programming number of
operations for maintenance
0
threshold
[in hundreds]
Cross out
Default
setting
used
0
Short bars 20-45, generally standard spring
0
1
Long bars 45-60, generally XL spring
0
Logic not enabled
1
 
1
Switches automatic closing on
0
Logic not enabled
0
 
1
Closes 1 second after the photocells are cleared before waiting for the set TCA to elapse.
Inputs congured as Start E, Start I, Ped
0
operate with 4-step logic.
Inputs congured as Start E, Start I,
1
 
1
Ped operate with 3-step logic. Pulse
during closing reverses movement.
Inputs congured as Start E, Start I, Ped
2
operate with 2-step logic. Movement
reverses with each pulse.
0
The ashing light comes on at the same time as the motor(s) start.
0
 
1
The ashing light comes on approx. 3 seconds before the motor(s) start.
0
Pulse operation.
Deadman mode.
Input 61 is congured as OPEN UP.
Input 62 is congured as CLOSE UP.
1
Operation continues as long as the OPEN UP or CLOSE UP keys are held down.
0
 
Emergency Deadman mode. Usually pulse operation.
If the board fails the safety device tests (photocell or safety edge, Er0x) 3 times in a row, Deadman
mode is enabled which will stay active for 1 minute after the OPEN UP - CLOSE UP keys are released.
2
Input 61 is congured as OPEN UP.
Input 62 is congured as CLOSE UP.
0
Pulse from inputs congured as Start E, Start I has eect during opening.
1
 
1
Pulse from inputs congured as Start E, Start I has no eect during opening.
0
Pulse from inputs congured as Start E, Start I has eect during TCA pause.
0
 
1
Pulse from inputs congured as Start E, Start I has no eect during TCA pause.
0
Pulse from inputs congured as Start E, Start I has eect during closing.
0
 
1
Pulse from inputs congured as Start E, Start I has no eect during closing.
0
Standard operating mode (left barrier).
0
 
1
Opens in other direction to standard operating mode (right barrier).
0
Input congured as Phot (photocell).
1
Input congured as Phot test (tested photocell).
4
2
Input congured as Phot op (photocell active during opening only).
3
Input congured as Phot op test (tested photocell active during opening only).
4
Input congured as Phot cl (photocell active during closing only).
5
Input congured as Phot cl test (tested photocell active during closing only).
6
6
Input congured as Bar, safety edge.
7
Input congured as Bar, tested safety edge.
8
Input congured as Bar 8k2.
ENGLISH
Description
Running speed during opening [%]
Sets the running speed that the barrier must reach during opening, as a
percentage of the maximum speed the actuator can reach.
Running speed during closing [%]
Sets the running speed that the barrier must reach during closing, as a
percentage of the maximum speed the actuator can reach.
Allows you to set a number of operations after which the need for main-
tenance will be reported on the AUX output congured as Maintenance
or Flashing Light and Maintenance .
Optional extras
AFTER STOP
WARNING: safety devices are not enabled.
WARNING: with the device set to Emergency Deadman mode, safety devices are not enabled.
step-by-step mov.
2 STEP
3 STEP
CLOSED
OPENS
OPENS
DURING
CLOSING
OPEN
CLOSES
CLOSES
DURING
STOP + TCA STOP + TCA
OPENING
OPENS
OPENS
GIOTTO BT A ULTRA 36 -
4 STEP
OPENS
STOPS
CLOSES
OPENS
31

Publicidad

Tabla de contenido
loading

Tabla de contenido