To Remove The Guard Extension; To Assemble The Cutting Equipment; To Attach The Guard Extension - Husqvarna 135R Manual De Usuario

Ocultar thumbs Ver también para 135R:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Adjust the handle to put the product in a good work
position.
5. Tighten the knob fully.

To assemble the cutting equipment

The cutting equipment includes a cutting attachment and
a cutting attachment guard.
WARNING:
WARNING:
attachment guard that is recommended for
the cutting attachment. See
page 25 .
WARNING:
cutting attachment can result in injury or
death.

To attach the guard extension

CAUTION:
when you use a trimmer head/plastic blade.
Do not use the guard extension when you
use a grass blade.
1. Put the guard extension in the groove of the cutting
attachment guard.
2. Put the guard extension into position on the cutting
attachment guard with the 4 locking hooks.
975 - 005 - 14.11.2022
Use protective gloves.
Always use the cutting
Accessories on
An incorrectly attached
Use the guard extension

To remove the guard extension

Release the locking hooks with the spark plug
wrench.
To attach the grass blade and the grass blade
guard/combination guard
1. Put the blade guard/combination guard (A) onto the
shaft and tighten the bolt to attach it.
2. Make sure that the guard extension is removed.
3. Turn the output shaft to align one of the holes in
the drive disc (B) with the related hole in the gear
housing.
4. Put the locking pin (C) in the hole to lock the shaft.
5. Put the grass blade (D), the support flange (F) and
the support cup (E) on the output shaft.
D
C
A
A
G
E
F
B
11

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

336fr

Tabla de contenido