Possible Malfunctions - Bartscher 700378G Instrucciones De Uso

7. Possible Malfunctions

Problem
No cooling
effect at all.
Cooling effect
insufficient.
Heavy noise.
The compressor
does not switch
off automatically.
The aforementioned problems are only examples. If these or other problems
appear, turn the device off immediately and stop using it. Ask for help from
qualified specialist personnel in examining and repairing the device.
Cause
• Plug not connected to
socket.
• Defective fuse.
• Power breakdown.
• Direct sunlight or heat
sources nearby.
• Bad air circulation around
the device.
• Doors are not closed
properly or have been
open for too long.
• Door sealing is damaged
or deformed.
• Interspaces between the
foods are too small or too
many foods are stored.
• Air inlet and/or air outlet
blocked.
• The device does not stand
on an even surface.
• The device touches walls
or other items.
• The device is too full.
• Door has been open for
too long.
Solution
• Connect the plug properly.
• Check the power supply.
• Check the power supply.
• Remove the device from the
heat source.
• Arrange sufficient space
between walls and other
items.
• Properly close the doors.
Keep the door opening
periods low. Contact the
retailer.
• Contact retailer
• Arrange sufficient space
between the foods in the
device and remove
dispensable foods.
• Keep free/ unblock the air
inlet/outlet from (parts of)
food or other material.
• Set the device on an even
surface.
• Arrange sufficient space
between device and walls
and/or other items.
• Remove dispensable foods.
• Keep the door opening
periods low.
- 31 -