Cleaning And Care; Important - Qilive Q.5815 Manual De Instrucciones

5.7. IRONING TIPS
EN
■ Before ironing, sort garments according to the ironing instructions on the care
labels or by fabric type.
■ Always start with the garments that require the lowest temperature setting. Then
continue with the garments that require a higher temperature setting, and so on,
increasing the temperature setting gradually. It takes an iron longer to cool down
than to heat up.
■ Always test on a small, discreet area before ironing the entire piece to ensure the
temperature is not set too high.
■ Silk and dark fabrics are prone to have shine marks. Turn them inside out before
ironing.
■ To avoid scorching delicate fabrics, turn the garment inside out and use a pressing
cloth between the garment and the iron.
■ Iron fabrics with special finishes (polishes, folds, contrasts, etc.) at a low
temperature.
■ When ironing a fabric blend, always choose the lowest temperature setting of the
two fabrics. For example, if a garment is made of 60% polyester and 40% cotton,
use a temperature suitable for polyester and do not use the steam function.

6. CLEANING AND CARE

6.1. CLEANING
WARNING! Before cleaning, always unplug the appliance from the wall socket
and let it cool down completely.
WARNING! Do not immerse the appliance, power cord or plug in water or any
other liquids, as they contain electrical components. Do not rinse them under
the tap.
IMPORTANT: Never use solvents, chemical or abrasive cleaning agents, wire brushes,
sharp objects or scouring pads to clean the appliance.
■ Empty the water tank after each use. Do not store the appliance with water in the
tank.
■ Wipe the soleplate (2) and steam holes with a soft cloth dampened with water or
mild soapy water to remove occasional buildup of limescale or residues.
■ Wipe the iron and steam station base (5) with a soft cloth lightly moistened with
water.
■ Wipe the water tank (4) and thermal insulated platform (11) with a soft dry cloth.
■ Dry the appliance well with a soft dry cloth after cleaning.
■ Perform the Self-clean process regularly, or when the Self-clean button (8)
illuminates (→ SELF CLEAN PROCESS).
6.2. STORAGE
■ Place the iron on the thermal insulated platform (11) and store the steam supply
hose (12) in the storage compartment (6).
■ Coil the power cord and tie it with a cord tie. Keep the cord next to the appliance.
■ Store in a cool, dry and safe place, out of the reach of children.
10