Qilive Q.5815 Manual De Instrucciones página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
9. The plug must be removed from the power socket
EN
before filling the water tank.
10. Remove the mains plug from the power socket once
you are done using the steam iron and before cleaning it.
11. The iron is not to be used if it has been dropped, if
there are visible signs of damage or if it is leaking.
12.
The surfaces are liable to get hot during use.
13. Risk of burns! The steam released by the appliance
and the soleplate can reach very high temperatures
during use. Handle the appliance by exclusively holding
it by the handle.
14. The iron must not be left unattended while it is
connected to the supply mains.
15. Prevent any damage to the power cord by not
subjecting it to being crushed, twisted or rubbed against
sharp edges. Keep the appliance away from heat, cold,
dust, direct sunlight, humidity, drips or water splashes.
Keep the power cord away from all hot surfaces and
open flames.
16. Arrange the cord such that no one can pull on it or
inadvertently trip over it.
17. Any openings intended for filling, descaling, rinsing or
inspection that are under pressure must not be opened
during use.
18. The mains plug must be removed from the power
socket before filling the water tank.
19. This appliance must be used and rested on a flat,
stable surface.
20. The iron must only be used with the station provided.
21. When placing the iron on its station, ensure that the
surface on which the station is placed is stable.
22. In order to protect the soleplate, refrain from sliding it
over any zippers, rivets or buttons on clothing.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido