Guarantees And Limitations Of Liability - Qilive Q.5815 Manual De Instrucciones

6.3. SELF-CLEAN PROCESS
The Self-clean button (8) will illuminate to remind you that the appliance needs to be
descaled.
To maintain optimum performance, descale your appliance with the Self-clean process
when the Self-clean button (8) illuminates, or once every 1 to 3 months, depending on
the usage of the appliance and the water hardness in your region.
1. Prepare a large heat-proof container to collect the waste water. Place the
container on a steady surface.
2. Fill the water tank to the "MAX" level with tap water.
3. Turn the Temperature dial (9) to the "MAX" setting and wait until the heating-up
indicator light (1) goes off.
4. Hold the iron horizontally over the container and press the Self-clean button (8)
for 2 seconds. The appliance will enter Self-clean Mode with a beep sound and
the Self-clean button will start to blink. The soleplate will start to release hot water,
steam and scale.
WARNING! Escaping steam and water from the iron is extremely hot. Always
keep your face and body at a safe distance from the iron.
5. Gently move the iron horizontally forwards and backwards. The Self-clean process
lasts about 3 minutes. Once the process is complete, the appliance will return to
normal operation.
6. Pass the iron over an old towel to dry the soleplate (2), and then place the iron on
the thermal insulated platform (11).
7. When the Heating-up indicator light (1) goes off, remove the iron and dry iron
on an old towel for a few minutes to evaporate the remaining water in the steam
chamber.
8. Turn the Temperature dial (9) to "MIN" and unplug the power cord from the wall
socket.
9. The Self-clean process is now complete.
NOTE: If the Self-clean button (8) keeps blinking but the Self-clean process does not
start, check and ensure that the Temperature dial (9) is turned to the "MAX" setting.
The appliance will continue with the Self-clean process once the Temperature dial (9) is
turned to the "MAX" setting.
7. GUARANTEES AND LIMITATIONS OF
LIABILITY
This product is guaranteed for a period of 36 months (including the legal guarantee of
24 months as defined by local law as well as a commercial guarantee of 12 additional
months offered by the brand) from the date of purchase, against any failure resulting
from a manufacturing or material defect.
This guarantee does not cover damage resulting from a faulty installation, incorrect
use, or normal wear and tear.More specifically, the guarantee does not cover:
■ Damage or problems caused by incorrect use, accidents, modifications or an
electrical connection with the wrong current or voltage.
11
EN