Lavorwash SWL 990 ET Manual De Instrucciones página 25

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 70
1)
Gear switch
2)
Hour counter
3)
Ignition key
4)
Brushes motor switch
5)
Charge indicator
6)
Filter Buzzer Button
7)
Acoustic Indicator Button
8)
Working light switch (optional)
GEAR SWITCH :
Part. 1 The purpose of the gear switch lever is to move the machine forward or reverse . When the switch is in
forward position (arrow pointing up) by pressing the pedal Part. 3 Fig. 10 the machine moves forward . When
the switch lever is in reverse position (arrow pointing down) by pressing the pedal the machine moves reverse .
For safety reasons, the reverse speed is very low. If the switch is left in central position, the machine
moves neither forward nor in reverse .
FILTER BUZZER BUTTON:
Part. 6 This buzzer cleans the suction filters through a motor-vibrator Part. 2 Fig. 5; it must be pressed at
least 6 / 7 times for 8 / 10 seconds each (operation to be performed before starting work, before emptying the
bin and with the motor off); to perform this operation with motor running, close the suction by pulling the knob
Part. 1 Fig. 6.
ACOUSTIC INDICATOR BUTTON:
Part. 7 By pressing this button the acoustic indicator switches on .
BRUSHES MOTOR SWITCH:
Part. 4 By actioning this switch either central and side brushes are activated .
IGNITION KEY :
Part. 3 It activates the switchboard and in particular the movement potentiometer . It is therefore possible to
move the machine without have it working .
WORKING LIGHT SWITCH: Optional
Part. 8. It activates the adjustable working light .
CHARGE INDICATOR:
Part. 5 It indicates the charge level of batteries and it's represented by three coloured lights (red, yellow and
green); by turning on the ignition key Part. 6 they switch on in the following order: red-yellow-green; wait until
green light is on before forwarding or reversing. If red light should switch on batteries need recharging .
IT IS RECOMMENDED NOT TO WAIT UNTIL THE RED LIGHT TURNS ON TO PROCEED WITH
RECHARGING OF BATTERIES BUT TO PROCEED WITH THE OPERATION AS SOON AS
YELLOW LIGHT SWITCHES ON.
HOURCOUNTER:
Part. 2 Makes it visible the number of hours worked by the machine .
STANDARD FEATURES SWL-R 990 ET (battery model)
25

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Swl 990 st

Tabla de contenido