Stihl FG 3 Instrucciones De Servicio página 14

english
Setting Up
Use a slide caliper or similar to find the
shortest cutter. This is the master cutter
for filing all other cutters.
If the master cutter is in the left-hand row
of cutters, clamp the guide bar so that
the bar nose points to the right. If the
master cutter is in the right-hand row of
cutters, the bar nose must point to the
left.
14
1
1
:
Place the filing tool on the guide bar.
:
The clamping jaws (1) must face the
bar nose and be in line with top
edge of rivet heads.
:
Tighten down the wing screw (2).
2
4
:
Use the adjusting screw (3) to
center the filing tool above the
chain.
:
Tighten the second clamping jaw
with the clamp screw (4) so that the
chain can still be pulled along the
bar with a screwdriver or suitable
rod engaged in a cutter.
3
FG 3