4 Operating and adjusting
WARNING
Risk of injury due to monitors come crashing
down!
PLEASE NOTE
Risk of material damage!
EN
For safety reasons, counterweights are to be installed
in the Base Plate in some configurations.
4.2 Operation
4.2.1 Rules for use of counterweights
If the purchased configuration is arbitrarily changed, the
following rules for use of the counterweights for the single
units must be applied:
18
}
Do not stay under the monitor.
}
Check the monitor for secure attachment before use.
}
Install the monitor mount in accordance with the
assembly directions.
}
Follow the assembly instructions.
}
Pay attention to the maximum load capacity.
}
Take the cleaning and care instructions into account.