Parts; Preparation - Truper ESMA-9N4 Manual De Instrucciones

Protective
Guard
Guard
Bracket
Abrasive Disc
model ABT-223 (9") included
Outer
Flange
Inner
Flange
Auxiliary Handle
Assembling Orifice
Guard
Bracket
Protection Guard Assembly
1. Open the clamp lever and match both cantilevered parts inside the protection guard
bracket with the matching slots in the axis cover. Push the protective guard down until the
protruding parts engage and rotate freely with the corresponding grooves in the axis cover.
2. With the clamp lever open, turn the protective guard to the desired working position.
3. Set it pushing the bracket lever.
Protective
Guard
1
Disc Assembly
4. Fit the inner flange onto the spindle.
5. Set the disc onto the inner flange.
6. Set the outer flange onto the spindle.
7. Press the spindle lock into the grinder head.
8. Screw the outer flange with the lock nut wrench until securely fastened.
DANGER The spindle lock should only be used to change discs.
Never use it to stop the disc while rotating.

Parts

Vibration
Absorbing Auxiliary
Handle

Preparation

2
Slot
Spindle
Lock
Disc
Protective
Carbon
Guard
cap (X2)
3
Lock Nut
Wrench
(Included)
Handle
Switch
Trigger
5
5/8-11
UNC-1A
7
ENGLISH
Spindle
Lock
Guard
Bracket
Power
Supply Cord
Power
Cord Protector
8
6
4
7