Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Protective
Guard
Guard
Bracket
4
/
" abrasive
1
2
disc included
Outer
Flange
Inner
Flange
Auxiliary Handle
Assembling Orifice
Guard
Bracket
Protection Guard Assembly
1. Match both cantilevered parts inside the guard bracket with the corresponding
slots in the axis cover.
2. Turn 180° into the opposite position.
3. Fix pushing the bracket lever.
Protective
Guard
1
1
Disc Assembly
4. Fit the inner flange onto the spindle.
5. Set the disc onto the inner flange.
6. Set the outer flange onto the spindle.
7. Press the spindle lock into the grinder head.
8. Screw the outer flange with the lock nut wrench until securely fastened.
DANGER
The spindle lock should only be used to change discs.
Never to stop the disc while rotating.
6
ENGLISH
Auxiliary
Handle
Assembly
2
2
Slot
Axis
Lock
Lock Nut
Wrench
(Included)
Disc
Carbon
Brushes' Cap
3
3
5/8 - 11
UNC - 1A
Parts
Handle
Switch
Continuous
Trigger
use button
5
7
Axis
Lock
Protective
Guard
Power
Supply Cord
Power cord
protector
8
6
4
Publicidad
Capítulos
Tabla de contenido
