Parts; Assembly - Truper ESMA-7A3 Manual De Instrucciones

Bracket
Lever
Axis
Lock
Abrasive Disc
model ABT-222 (7") included
Outer
Flange
Inner
Flange
Auxiliary
Handle
Assembling Orifice
Bracket
Lever
Protection Guard Assembly
• Match both cantilevered parts inside the protection guard with the corresponding
slots in the axis cover.
• Turn 180° into the opposite position.
• Fix pushing the clamp lever.
Protective
guard
Disc Assembly
1. Fit the inner flange onto the axis.
2. Set the disc onto the inner flange.
3. Set the outer flange onto the axis.
• Press the axis lock into the grinder head.
4. Screw the outer flange with the lock nut wrench until securely fastened.
DANGER The axis lock should only be used to change discs.
Never use the axis lock to stop the disc while rotating.
6
ENGLISH
Protection
Guard
Auxiliary
Handle
Assembling Orifice
Auxiliary
Handle

Assembly

Slot

Parts

Handle
Rotation Button
Handle
Disc
Carbon brush Ventilation
Protection
Guard housing cap Slots
2
Inner
flange
5/8-11-UNC-1A
Grinder
head
Lock nut
wrench
Power Cord
Guard
Power
Cord
Axis
Lock
Protection
Guard
Switch Switch
Lock
Lock nut
wrench
4
3
Outer
flange
Disc
1