User Display - GYS WF 50 Manual De Uso

Users
The user mode enables the machine to be shared between several users. The first time that the machine is started, it
will be in Admin mode. The administrator can create user profiles. Each user has his own setup (mode, setting, process
and JOBs etc.) and this cannot be modified by another user. Each user needs a personal four digit code in order to sign
in to the machine.
- The administrator has access to the entire general menu.
- Users have access to a simplified interface. Users do not have the ability to delete information (Tracking, Jobs, User
profiles, etc)
User configuration interface (reserved for the administrator).
The left side of the screen lists the users. The administrator has the ability to sort these users by name or by date by
quickly pressing button no. 2. Pressing this button for a prolonged time will delete the active user(s) instead (although the
Admin account cannot be deleted).
On the right side of the screen you can see the details of all the created users, along with the following information: Avatar,
Name, Team No. and Tolerance (%).
Creating a user profile
Press push-button no. 3 (
- User: Customise the user's name by pressing push button no. 3 ( ).
- Avatar: Choice of colour for the user avatar
- Team: Allocation of team number (10 max)
- User code: personal access code (Default 0000)
- Current setting tolerance I:
OFF: free setting, the current setting is not limited.
± 0.0A : No tolerance, current limiting (not recommended).
± 0.A> ± 50A : setting range where the user can adjust the current.
- Voltage setting tolerance U :
OFF: free setting, the voltage setting is not limited.
± 0.0V : no tolerance, limiting the voltage (not recommended).
± 0.1V> ± 5.0V : setting range where the user can vary the voltage.
- Wire speed setting tolerance (m/min):
OFF: free setting, the wire speed setting is not limited.
± 0.0m/min : no tolerance, limiting the wire speed (not recommended).
± 0.1m/min > ± 5.0m/min : setting range at which the user can vary the wire speed.
It is not possible to change the admin name or avatar for the «Admin» user.
Editing a user profile
Select the user on the left side of the screen and press push-button no. 4 ( ).
Choice of users
If one or more user profiles are created, the user block displays all of the machine's users.
Select the user of your choice and press push button no. 4 (
code.
The «Close» feature locks the machine on the users choice so that no other settings are accessible. This screen
remains the same when the machine is switched on (STOP -> START switch).

User display

At the top left of the screen, the avatar and name of the active user are displayed.
Unlocki code
Each user profile is protected by a personal 4-digit code. The default code will be 0000 if not changed. After failing to
correctly enter your personal code three times, the interface will be blocked and you will be asked for an unlock code. This
code is made up of six digits and cannot be changed. It is: 314159.
) to create a new user.
) to confirm the choice. You will be asked for an unlock
19