Allen + Roth ARFPDF32F1 Manual Del Usuario página 27

Fig. 26—LCD Screen
4 5
1
2
3
ROOM SET
Fig. 27—Control Settings at Start up
Fig. 28—Manual Function
Screen while
pressing the
ON key
Screen while
pressing the
OFF key
Remote Control Operation (cont.)
6
7
TEMP
TEMP
Screen after
the 3-Second
Default
Screen after
the 3-Second
Default
1. TEMP Temperature indication.
2. DISPLAY Indicates CURRENT room temperature.
3. FLAME
Indicates burner/valve in operation.
4. A: Thermostat function.
5. M:
Manual function.
6. SET Remote control battery display
7. °C to °F
Temperature in degrees F or C.
Control Settings at Start up (see Fig. 27):
After batteries are installed, press any button and
the screen lights up and the room temperature is
displayed in °F , the control is in manual mode and
the battery level is displayed.
Setting °F/°C Scale
The factory setting for temperature is °F. To change
this setting to °C Press the ON and OFF buttons
on the remote at the same time. Follow this same
procedure to change from °C back to °F.
Manual Function (see Fig. 28):
To operate the remote system in the MANUAL MODE,
do the following:
ON OPERATION
Press the "ON" button and the heater flame comes on.
The display screen shows "ON" for three (3) seconds, the
display shows the room temperature, and the flame
icon.
OFF OPERATION
Press the "OFF" button and the heater flame shuts off.
The display screen shows "OFF" for three (3) seconds,
display shows the room temperature, and the flame
icon is off.
Vent-Free Gas Fireplace User's Manual
27