Swarovski Optik STC 17-40x56 Manual De Instrucciones página 10

2. OPERATION
2.1 REMOVING THE OBJECTIVE LENS COVER AND EYEPIECE COVER
2.2 ATTACHING THE SIDE CARRYING STRAP
The objective lense cover is mounted when the instrument is delivered. The side carrying
strap can be attached quickly and easily when required.
To attach the side carrying strap to the ATC/STC, hold the side that does not have the
click fastener and feed the loop through the loop holder (1+2). Then pull the other end
of the side carrying strap (3) through the loop and tighten it (4).
18
ATC/STC / EN ATC/STC / DE
2
1
3
8
6
5
7
9
On the other side, release the end of the clip mechanism (5+6) and feed the loop
through the loop holder (7). Then pull the end through the loop (8), tighten it (9), and
attach the clip to the other end of the side carrying strap (10).
Note: When the carrying strap is mounted, the objec-
tive lense cover can be fixed to the carrying strap.
1
4
3
2
ATC/STC / EN ATC/STC / DE
4
10
19