Swarovski Optik STC 17-40x56 Manual De Instrucciones página 11

2.3 MOUNTING ON THE TRIPOD HEAD
The ATC/STC has a
that has been inserted reduces the thread to ¼" UNC. The
thread can therefore be used to mount an adapter plate and
1/4"
the spotting scope is compatible with all common tripod heads.
2.4 USE WITHOUT A TRIPOD
For use without a tripod, a detachable half shell is supplied. This can be attached using
the locking screw provided and the connection thread.
Step 1: Remove the bush from the connection thread in the spotting scope.
Step 2: Remove the O-ring (black ring) supplied to protect the locking screw during
transport.
2
1
3
20
ATC/STC / EN ATC/STC / DE
/ " UNC connection thread. The bush
3
8
4
Step 3: Secure the half shell to the bottom of the spotting scope using the locking screw.
The spotting scope and half shell can be used either hands-free or supported, for
example, on a backpack. The protective half shell allows both the focusing ring and
the magnification adjustment ring to be rotated by 360° when placed on a surface.
2.5 ADJUSTING THE TWIST-IN EYECUP
For use without glasses: unscrew the twist-in eyecup (counter-
clockwise) as far as it will go.
For use with glasses: screw in the twist-in eyecup (clockwise)
as far as it will go.
ATC/STC / EN ATC/STC / DE
21