Presentation Of The Instrument - Chauvin Arnoux MR6292 Manual De Instrucciones

1.2 PRESENTATION OF THE INSTRUMENT

The current clamp can be used to measure the current flowing in a cable without opening the circuit. It
also serves to isolate the user from the dangerous voltages in the circuit.
The MR692 AC/DC current clamp can be used to measure currents up to 50A DC.
It is powered by the C.A 6292 to which it is connected.
Removable arm. Fixed arm.
Unlocking lever.
Guard.
Trigger.
5‑point XLR
connector.
ON indicator.
50 A : 10 mV/A
DC DC
MR6292
Shielded lead.
13