Steelcase Migration SE Instrucciones De Uso página 36

5 Operating and adjusting
Height adjustment – Up/Down control panel
Manual reset of desktop
Wait for 5 seconds if the desk has just been connected to the
mains.
EN
Releasing the control panel before the process is
completed will interrupt the manual resetting
process and it must be started anew.
Limiting height adjustability
These settings can limit the desktop movement range (for
example if there is a rolling file cabinet under the desk or a set
of shelves above it). The stopping positions for the rolling file
cabinet become the new lowermost end position, and the
shelf stopping positions become the new uppermost end
position.
36
2. Release the "Up or Down" button.
ü The desktop stops at the desired point. The display
indicates the desk height.
1. Press and hold the "Down" button.
=
The lower end position is reached.
2. Continue to hold the "Down" button for at least 3
seconds.
=
The resetting and initialisation process is starting.
3. After conclusion of the resetting and initialisation
process, press the "Up" button.
ü The desired height is reached.
1. Use the "Up" or "Down" button to move the