Steelcase Migration SE Instrucciones De Uso página 37

Limiting height adjustability
desktop to the lower half or the upper half of the
movement range.
2. Simultaneously press and hold the "Up" and
"Down" buttons for 10 seconds.
ü The position is saved.
Resetting to factory settings
This function can be used to reset the system to the factory
settings.
1. Search for the control unit to reset it.
2. Briefly press the "Down" button three times (then
release it again):
3. Simultaneously press the "Up" and "Down"
buttons:
4. Wait 5 seconds: then press and hold the "Up"
button until the green light goes out.
ü The system has now been reset to the factory
settings.
5 Operating and adjusting
EN
37