Steelcase Migration SE Instrucciones De Uso página 40

5 Operating and adjusting
Configuring memory positions
Calling up memory positions
EN
Limiting height adjustability
These settings can limit the desktop movement range (for
example if there is a rolling file cabinet under the desk or a set
of shelves above it). The stopping positions for the rolling file
cabinet become the new lowermost end position, and the
shelf stopping positions become the new uppermost end
position.
40
height is reached.
=
The display indicates the desk height (e.g. 73 cm).
2. Press the "SAVE" button.
3. Press the desired "Memory position" button (e. g.
button "2")
=
The display indicates S 2.
ü The display indicates the desk height after roughly 2
seconds.
1. Press and hold the corresponding memory position
button (e.g. button "1" or button "2").
ü The desktop is moved until the stored desktop
height is reached. The desktop movement is stopped
whenever the button is released before the memory
position has been reached.
1. Move the desktop to the lower half or the upper half
of the movement range.
2. Press and hold the "SAVE" button for 10 seconds
ü The position is saved.