Steelcase Migration SE Instrucciones De Uso página 41

Changing the displayed unit – CM/INCH
1. Simultaneously press and hold the buttons "1", "2"
and "Up" for three seconds; then release the
buttons.
=
The letter S and a number (e.g. S 7) are indicated
on the display.
2. Press and hold the "Up" button until S 5 is indicated
on the display.
=
S 5 is displayed.
3. Press the "SAVE" button.
ü If the display was previously set to centimetres (cm),
it will now be switched over to inches (inch) and vice
versa.
Resetting to factory settings
This function can be used to reset the system to the factory
settings.
1. Press and hold the "1", "2" and "Up" buttons (for 3
seconds).
=
The display indicates S 0
2. Briefly press the "SAVE" button.
=
The display indicates: S 0 flashing.
3. Wait 3 seconds: Press the "Up" button until the
table is completely lowered.
5 Operating and adjusting
EN
41