Descargar Imprimir esta página

Kemper 79 205 Instrucciones De Servicio página 63

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 157
Item
Description
22
Spiral pipe
23
Pipe bracket
24
Pipe bend
25
Extraction arm holder
1. Insert the pipe bend into the spiral pipe.
2. Place the spiral pipe with pipe bend on the pipe holders. The pipe bend
must be inserted into the socket of the extraction arm holder.
3. Fasten the pipe bend with the supplied sheet metal screws.
4. Secure the spiral seam tube with the Velcro tape. To do this, guide the
Velcro tape around the spiral pipe and then thread the Velcro through
the openings in the holders and tighten firmly.
5. Connect the extraction hose to the spiral pipe and the wall mount
bracket, then secure the ends of the extraction hose with hose clamps.
NOTE
For example, a wire feed unit can be mounted for carrying in the hitch
under the cantilever arm.
1502760-03
Fig. 25: Spiral pipe
Item
26
27
28
Tab. 26: Positions on the product
- 63 -
Description
Velcro tape
Suction tube
Hose clamps
EN

Publicidad

loading