Kemper 79 205 Instrucciones De Servicio página 67

5.8.2 Control Box - Retrofit Transformer
Pos. Description
D Control box
11 Transformer
1. Switch off the control box (Pos. D) and disconnect it from the mains.
2. Open the control box (Pos. D) by removing the cover plate.
3. Attach the transformer (Pos. 11) to the base plate of the control box (Pos.
D). Use the enclosed fixing material for this purpose.
4. Insert the connector plug (Pos. 11) into the connection socket (Pos. 12).
5. Close the control box (Pos. D) again with the cover plate.
6. Connect the control box (Pos. D) to the mains and put it back into
operation.
1502760-03
Fig. 28: Control Box - Retrofit Transformer
Tab. 30: Positions on the product
- 67 -
Pos. Description
12 Connector plug
13 Connection socket
EN