During the ongoing measurement process, the device cannot be operated via the task bar. In
this status, the task bar is shown slightly darkened.
The icons in the task bar have the following meanings:
Home icon:
Pressing this icon always returns the user to the start screen of the device (see Fig. 3:
Start screen, p. 9). It is not possible from here to access the most recently used application
using the
icon.
Back icon:
This icon is used to always jump back to the previously selected level or application. The
button is inactive in the start screen. After some menus have been exited, they cannot be
accessed again using the
closed by exiting the menu.
Options icon:
Additional options – if they are available in the selected menu – can be accessed using
this icon.
Test icon:
The basic functions, all NANOCOLOR
measurement, and test number applications can be accessed using this icon.
Main menu icon:
The setting menu and the IQC menu as well as additional functionalities can be reached
using this icon.
Save icon:
This icon leads to the measured value memory of the device. All measurements are
stored in this memory and they can be accessed using the
Quickstart Guide NANOCOLOR
10
icon (such as the measurement menu), since the process was
tests, and the special methods, scan, color
®
/
® UV
VIS
icon.
II / VIS II V 2.00/09‑2022