Descargar Imprimir esta página

MACHEREY-NAGEL NANOCOLOR VIS II Guía Rápida página 18

Ocultar thumbs Ver también para NANOCOLOR VIS II:

Publicidad

Idiomas disponibles

Idiomas disponibles

a scan, the spectrum recorded is shown in the detail view. Moreover, in the case of a color
measurement and a scan, the respective analysis menus can be reached by pressing
.
The IQC memory backs up all measurement results that are generated via the IQC menu. These
are results of internal quality control which are stored separately from the general measurement
results.
UV/VIS II
17-09-2014.: 10:46 Standardmessung
17-09-2014.: 10:46 Standardmessung
Bestanden
Bestanden
17-09-2014.: 10:46 Standardmessung
17-09-2014.: 10:46 Standardmessung
Bestanden
Bestanden
17-09-2014.: 10:46 Standardmessung
17-09-2014.: 10:46 Standardmessung
Nicht bestanden
Nicht bestanden
Fig. 18: IQC memory
Cleaning
Risk of electrical shock: The device must be switched off and disconnected from the power
supply during all cleaning work.
Risk of fire: Do not use any flammable cleaning agents or organic solvents to clean
the device
Hazard due to the development of gases containing chlorine: Chlorine compounds can
develop lethal gases under the influence of UV radiation. For cleaning, do not use any
cleaning agents containing chlorine.
Do not clean the device with acetone or similar products.
Ensure that there is no cuvette in the cuvette shaft.
1. Wipe the outside of the device with a damp cloth. Use water or a mild cleaning agent for this
purpose. Then dry the device with a soft cloth.
2. If necessary, clean or dry the touch screen with a soft, lint‑free cotton cloth.
3. If necessary, clean or dry the cuvette shaft with a soft, lint‑free cotton cloth.
Details on cleaning and maintaining the device can be found in the complete operating
instructions of the device.
Quickstart Guide NANOCOLOR
18
The IPC memory is accessed using the
Open Mode, 01.03.2016, 10:57
in the task bar. Pressing
Anfangsdatum
Enddatum
to the IQC memory. The IQC card 4, among other
Methode
Benutzer
things, is created from the results stored here.
Probeort
Analogously to the measured value memory,
Probetyp
Probenehmer
the IQC memory can be printed, selected, or
Anwender
IQK Typ
exported. To view detailed information, the same
rules apply as in the case of the measured value
memory.
DANGER
WARNING
DANGER
NOTICE
NOTICE
® UV
/
II / VIS II V 2.00/09‑2022
VIS
or
icon
followed by
leads

Publicidad

loading

Este manual también es adecuado para:

Nanocolor uv/vis ii