Beko BHCA66641BBHS Manual Del Usuario página 17

2. Gently pull the filter towards you first
and pull it upwards to remove it from its
slot.
3. Reinstall the aluminium filter in its slot
after flushing by following the above
steps in reverse.
5.3 Hood Lamp
In the event of a lamp malfunction in the
hood, contact your local dealer or the Cus-
tomer Service, and ensure that the lamp is
replaced.
5.4 Carbon Filter (Usage without a
flue)
General warnings
• If you have installed your product
without a flue, you should replace your
carbon filters every 4 months in normal
use. You can obtain the carbon filter
from Authorized Services.
• The carbon filter should never be
washed.
6 Troubleshooting
If the problem persists after following the
instructions in this section, contact your
vendor or an Authorized Service. Never try
to repair your product yourself.
Product is not working.
• Fuse may be faulty or blown. >>> Check
the fuses in the fuse box. Change them if
necessary or reactivate them.
• If you do not follow the rules for cleaning
and replacing the filters of your hood,
you may cause a fire.
Removing carbon filters
1. Open the glass cover of the hood and
remove the aluminium filter.
2. Unscrew the carbon filters on the right
and left of the motor holder.
3. Place the lug slots of your new carbon
filters into the lugs on the motor holder
and turn them clockwise to snap them
into place.
4. Close the hood glass cover after in-
stalling the aluminium filter.
• The product may not be plugged in. >>>
Check if the product is plugged in to the
outlet or not.
• The speed button may not be set. >>>
Press/touch the desired speed button.
• No electricity. >>> Ensure the mains is
operational and check the fuses in the
fuse box. Change the fuses if necessary
or reactivate them.
EN / 17
EN
DE
PL
ES