Descargar Imprimir esta página

Andis DBLC-2 Instrucciones De Uso Y Cuidado página 6

Ocultar thumbs Ver también para DBLC-2:

Publicidad

Idiomas disponibles

Idiomas disponibles

Note that the clipper or battery can be removed at any time during the charging cycle
without harming the clipper or battery.
CLIPPER INDICATOR LIGHTS (SPEED AND CHARGE LEVEL)
When the clipper is running, a green clipper indicator light means the battery has a
strong charge (Figure B). The light will turn yellow as the battery starts to run down,
indicating the battery has only a partial charge remaining. When the light turns
red, the battery may not hold enough charge to complete a large clipping job, and
should be recharged as soon as possible. If the clipper powers OFF, move the power
switch to the OFF position and place battery or clipper in the charging stand.
Automatically powering off protects the lithium-ion battery and is not a malfunction.
The clipper will resume normal operation when it is recharged.
Your clipper is equipped with five cutting speeds. The speeds are adjusted using the
speed adjustment button on the front of the unit (Figure B). To start your clipper,
move the power switch to the ON position. To increase your blade speed, slide the
button toward the blade of the clipper. To decrease your blade speed, slide the
button away from the blade of the clipper. You will see on the LED display that when
you change the speed, the LED's adjust accordingly (Figure D). To shut your clipper
OFF, move the power switch to the OFF position. The unit will power ON in the last
speed setting you were in when you turned the unit OFF.
NOTE: If charging stand indicator light is flashing, dirt or debris may have collected
on the charging contacts of the clipper, battery pack and/or the charging base,
prohibiting proper electrical connection. To clean these contacts, use a soft, dry cloth
to wipe them clean. The charging stand indicator light will turn off if the battery is too
hot to charge. When the battery has cooled, normal charging will resume.
Clipper in Charging Stand
Fully Charged
Charging
Clipper in Use
Full Charge
Medium Charge
Low Charge
6
Clipper Indicator Light
Green
Yellow
Red
Charging Stand Indicator Light
Green
Red

Publicidad

loading