Andis DBLC-2 Instrucciones De Uso Y Cuidado página 10

SAFETY RULES FOR CHARGER AND BATTERY PACK
1. Do not insert metallic objects into the battery pocket of the charger base.
2. Do not expose the charger to excessively dirty locations. If the charger pocket
becomes clogged with dust or hair, unplug the charger and gently remove hair or
other debris with a soft brush or vacuum cleaner.
3. To clean external parts of the charger, use a soft brush or damp cloth. Do not use
harsh abrasives, detergents, or solvents.
4. Do not use the charger designed for the Andis DBLC-2 clipper to attempt to charge
any other battery.
5. The battery contains an overload protection feature. In extreme cases, overload
protection may cause the battery to enter into a safety mode, protecting the clipper
circuitry. The battery will reset once the situation has been corrected and the unit
has been cycled on and off. Do not attempt to power any product other than the
Andis DBLC-2 clipper with this lithium-ion battery.
6. For maximum battery life, do not store clipper or charger under 50°F or over 104°F.
7. Do not expose the charger or clipper to excessively damp conditions.
8. Take care not to drop the charger or the clipper. Do not attempt to use a damaged
charger.
CARE AND SERVICING OF THE ELECTRICAL SYSTEM
Your clipper, battery and charger are an integrated electrical system. Good electrical
contact must be maintained for the motor to deliver full power and lithium-ion
battery to charge properly. Limited or erratic performance caused by dirt or age can
be corrected in the majority of cases.
BATTERY DISPOSAL
The product you have purchased contains a rechargeable battery. The battery is
recyclable. At the end of its useful life, under various state and local laws, it may be
illegal to dispose of this battery into the municipal waste stream. Check with your local
solid waste officials for details in your area for recycling options or proper disposal.
BLADE & CLIPPER REPAIR SERVICE
When the blades of your Andis clipper become dull after repeated use, it is advised
to purchase a new set of blades available through your Andis supplier or through an
Andis authorized service station. Some blade sets can be resharpened - contact
Andis Company for information on resharpening. If you wish your clipper to be
serviced as well, it should be carefully packed and mailed either Parcel Post Insured,
or U.P.S. to any Andis authorized service station. To contact Andis directly, please
call our Customer Support Team at 1-800-558-9441 or email us at
support@andisco.com.
10