Publicidad
Idiomas disponibles
Idiomas disponibles
2. Install the left- and right-hand glass guards in the installed clips, as illustrated below.
Secure the installed glass guards with the M4x8 bolts; place the washer on the inward
side of the glass guard. Tighten each bolt with the nut on the outer side of the appliance.
3. Install the middle glass guard by bolting its bottom holes to the clips using the M4x8
bolts. Secure the front face of the glass guard with the fender bar, installed to the side
clips (2) with the M4x12 bolts (to join all glass guards at their top).
4. The appliance is now ready for operation.
Publicidad
