Flama 1706FL Manual De Instrucciones página 20

If too many food pieces are added, or if
they are too large, you will not achieve a
satisfactory result.
After each maximum use period, let the
appliance cool to room temperature before
using it again.
WARNING: Do not use the appliance if the
motorized base, the cup, the blade, the lid
or any accessory is cracked or damaged.
For better chopping action, activate the
blade in pulses (1, 2, 3 system).
To obtain a fine and consistent result, if
necessary, scrape down any food from the
walls of the cup and place it in the center
using a spatula.
Safety switch
A special safety switch located in the motor
unit ensures that the appliance will only
work when the lid is properly placed on the
motor unit.
DISPOSING OF PACKAGING
MATERIAL
Remove the appliance from the box and
remove all packaging material, including
labels, except for the appliance's technical
information label.
The packaging protects the appliance
from damage
The packaging materials are selected
in accordance
compatible and
considerations and can therefore be
recycled. Returning the box and all
packaging materials that are no longer
needed back into the material loop saves
raw materials and reduces the quantity of
accumulated waste.
18
during transportation.
with environmentally
recycling-related
OPERATING INSTRUCTIONS
Chopper
Place the cup on the motorized base.
Attach the blade to the central column
and ensure it is secure. The blade is sharp,
handle with the utmost care.
Cut food into medium-sized pieces and
place in cup. Make sure to adhere to the
quantities shown in the "quantities and
times" table.
Cover with the lid.
Plug the power cable into the electrical
socket.
Turn on the appliance by vertically pressing
down on the lid, in short pulses, with the
palm of your hand. These presses should
be short (2 seconds) and repeated until
the maximum time shown in the table is
reached.
If the appliance does not work, check to see
if there is any food between the lid and the
cup.
To stop the appliance, stop pressing down
on the lid. The safety switch will stop the
spinning of the blade.
Wait until the blade has come to a full stop
before removing the lid.
Before removing the lid, ALWAYS unplug
the power cable from the electrical socket.
Remove the lid.
Remove the blade by pressing the central
button and lifting it up along with the cup.
NOTES:
- The obtained results depend on the
operation time of the appliance.
- If the consistency of the processed foods
worsens after a long period of use, replace
the blade.
www.flama.pt