Flama 1706FL Manual De Instrucciones página 22

pressure ring.
To stop the appliance, just release the
pressure ring.
Wait until the blade has come to a full stop
before removing the lid or blender cup
from the motorized base.
If you wish to add more food to the blender
cup during the blend cycle, turn off the
appliance and use the hole in the blender
cup lid.
TROUBLESHOOTING
Problem
The appliance does not
work.
There is a slight burning
smell during operation.
The device switches off
during operation.
The blade does not
rotate.
20
Cause
The appliance is not
plugged into the electrical
socket.
First uses.
Motor unit is overloaded.
Motor overheating.
Poor appliance assembly.
Pieces are too big.
www.flama.pt
Notes:
- To cut solid foods, add liquid (water, broth,
milk, etc.) without exceeding the indicated
maximum fill level.
The blender cup is appropriate for blending
vegetable soups; mayonnaise; milkshakes;
drinks, etc.
The blender cup is not appropriate for
beating egg whites, making mashed
potatoes or chopping raw foods.
Solution
Connect the appliance to the
electrical socket.
This is normal and will
disappear after the first few
uses.
Adhere to the indicated
quantities.
Unplug the appliance from
the electrical socket and wait
30 minutes before plugging it
in again.
Follow the instructions in the
"Use and care" section.
Cut the ingredients into
smaller pieces.