Dometic COOLAIR RTX 1000 Instrucciones De Montaje página 6

Intended use
The parking cooler is not suitable for installation in construction machines, agri-
cultural machines or similar equipment. They will not work properly if exposed to
strong vibrations.
This product is only suitable for the intended purpose and application in accor-
dance with these instructions.
This manual provides information that is necessary for proper installation and/or
operation of the product. Poor installation and/or improper operating or main-
tenance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts
provided by the manufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.
I
NOTE
As the parking cooler uses R134a as refrigerant with a GWP > 150, there may
be national restrictions for installation the parking cooler on certain vehicles
(i.e. the EU MAC directive 2006/40/EC). Check upfront the national require-
ments or contact your Dometic representative, if it is allowed to install the park-
ing cooler on your vehicle.
4.1 RTX1000, RTX2000
The installation kit enables the installation of a CoolAir RTX1000 or RTX2000
parking cooler in a roof ventilation opening (hatch) provided at the plant or
installed by the customer in an HGV driver cab.
4.2 SPX1200T
The installation kit enables the installation of a CoolAir SPX1200T roof evaporator
unit in a roof ventilation opening (hatch) provided at the plant or installed by the
customer in an HGV driver cab.
6
CoolAir
EN