Publicidad
Idiomas disponibles
Idiomas disponibles
4. How do I get started?
4.1. Inserting the batteries
After you have unpacked your device, insert the batteries. The battery
compartment is located on the underside of the device.
a) Remove the battery cover.
b) Insert the batteries (2 x size AAA 1.5 V), following the indicated polarity.
c) If the battery warning appears in the display, the batteries are
discharged and must be replaced with new ones.
Attention!
• Please use AAA Long-Life or Alkaline 1.5 V batteries and replace them
all at the same time.
4.2. Setting the date and time
1. After the new batteries are activated, the year
number flashes in the display. You can advance
the year by pressing the memory or "M" button.
To confirm and then set the month, press the time
or "T" button.
2. You can now set the month using the "M" button.
To confirm and then set the day, press the "T" button.
3. Please follow the instructions above to set the
day, hour and minutes.
4. Once you have set the last minute and pressed
the "T" button, the date and time are set and the
time is displayed.
5. If you want to change the date and time, press
and hold the "T" button down for approx. 3 sec-
onds until the year starts to flash. Now enter the
new values as described above.
14
Memory
Button
Time/Date
Button
Publicidad
