Publicidad
Idiomas disponibles
Idiomas disponibles
5.9. Memory: Reviewing readings
At the end of a measurement, this monitor automatically stores each
result with date and time. This unit stores 99 memories for each of 2 users.
Viewing the stored values
With the unit off (or with only the time and user icons showing), press the
"M" button. The display first shows "A," then shows an average of all
measurements stored in the unit. Please note: Measurements for each
user are averaged and stored separately. Be certain that you are viewing
the measurements for the correct user.
Pressing the "M" button again displays the previous value. To view a particular
stored memory, press and hold the "M" button to scroll to that stored reading.
Memory full
When the memory has stored 99 results, a new, measured value is stored
by overwriting the oldest value.
Clear all values
If you are sure that you want to permanently remove all stored
values, hold down the "M" button (the instrument must have
been switched off beforehand) until "CL" appears and then
release the button. If you do not want to clear the values, press
the POWER button. To permanently clear the memory, press the
"M" button while "CL" is flashing. Individual values cannot be
cleared.
5.10. Setting the medication reminder
This instrument allows you to set two alarm times at
which an alarm signal will then be triggered. This can be
a useful aid, for instance as a reminder to take medica-
tion or to remind you to take your blood pressure at the
same time each day.
20
Publicidad
