Disposal; Technical Specifications - ProMinent Flow Monitor Instrucciones De Servicio

10 Disposal

11 Technical specifications

Back pressure, max.: 16 bar
Viscosity:
In the case of higher viscosity either:
• meter at lower stroke rate or
• operate with static flow monitoring (see "Settings" - "b) static").
Materials information (materials in contact with chemicals):
Weight: approx. 200 g
Electrical data, reed-contact
Switch power, max.:
Switch voltage, max.:
Switch current, max.:
Temperature data:
Storage temperature:
Ambient temperature:
Feed chemical temperature
(at max. operating pressure):
Contact and
enclosure rating:
ProMinent ®
NOTICE
Observe relevant local directives!
Flow Control with pump types
for gamma/ L
Size I 1000, 1601
1602
Size II all
Contact Float
PVDF PTFE coating EPDM (in the case of Order No. 1009229, 1009336)
Disposal / Technical specifications
O rings
FPM-B (in the case of Order No. 1009335, 1009338)
10 W
200 V DC
0.5 A
-10 °C to +50 °C
-10 °C to +45 °C
-10 °C to +35 °C
IP 65 (in accordance with DIN EN 60529 and
IEC 60529, corresponds to VDE 0470 Part 1)
Viscosity,
max. (at 180/min)
50 mPa s
100 mPa s
150 mPa s
25