Emos P5733W Manual De Instrucciones página 4

2. Plug the chime unit into a 230 V AC/50 Hz socket.
3. Then, long-press the volume button
4. The chime LED will light up; release the
The chime will switch to self-learning pairing mode which lasts for
30 seconds.
During this time, press the ring button. The chime will ring and the button
is now paired with the chime.
This automatically ends self-learning mode.
5. To pair multiple buttons, repeat the process for each button from step 1.
Note: The chime has an internal memory where it stores the codes of the
currently paired buttons for the event of a power failure. There is thus no need
to pair buttons again after a power cut.
Wiping the Memory of Paired Buttons
Press and hold the volume button
Plug the chime into a socket.
The LED of the chime will light up after ca. 5 seconds. Release the
The LED will turn off.
The memory of all paired buttons will be erased.
Selecting a Ringtone
1. Repeatedly press the ringtone change button
2. Each press of the button will play a different ringtone. The last ringtone
played is the one that will be used.
Setting Different Ringtones when Paired with Multiple Buttons
If you use 2 or more buttons, you can set a different ringtone for each paired
button to better identify which button was pressed to ring the chime.
1. Plug the chime unit into a 230 V AC/50 Hz socket.
2. Then, long-press the volume button
3. The chime LED will light up; release the
4. The chime will switch to self-learning pairing mode which lasts for 30
seconds.
5. During this time, repeatedly press the ringtone change button
ringtone that plays last is the one set. Then press the ring button; the
chime will ring and the button is now paired with the chime.
6. This automatically ends self-learning mode.
Repeat the process from step 2 for every button.
If you later want to change the ringtone of already paired buttons, it is first
necessary to wipe the memory of paired buttons.
Setting the Bell Volume
1. Repeatedly press the
2. Each press will set a different volume level in the following order:
100 % – 75 % – 50 % – 25 %.
on the chime for ca. 5 seconds.
on the chime.
on the chime for ca. 5 seconds.
button on the chime.
4
button.
located on the chime.
button.
button.
; the