Publicidad
Idiomas disponibles
Idiomas disponibles
2
1
1.
DC 19V jack
Connect the included AC adapter to this jack.
The AC adapter is designed specifically for the VOX
Clubman 60. Do not use any other adapter, otherwise a
malfunction may occur.
2.
Cord hook
Wrap the AC adapter cord around this hook to prevent the
AC adapter from being accidentally disconnected.
3.
LINE OUT jack
Connect your PA system to this jack.
4.
INPUT 1 jack
Connect your guitar to this jack.
5.
INPUT 1 VOLUME knob, CLIP indicator
Use this knob to adjust the volume level of the guitar. The
CLIP indicator lights up if the volume level of the connect-
ed guitar is too high. Clipping could distort the sound and
reduce the sound fidelity. To avoid clipping, use the INPUT
1 VOLUME knob to adjust the volume level.
6.
INPUT 1 equalizer
Use this knob to adjust the sound of the INPUT 1 channel.
BASS knob
Use this knob to adjust the sound in the low-frequency
range.
MIDDLE knob
Use this knob to adjust the sound in the mid-frequency
range.
TREBLE knob
Use this knob to adjust the sound in the high-frequency
range.
As each knob is turned to the right, the range corre-
sponding to the knob will be emphasized. However, if
a range is overemphasized, feedback (howling) will be
more likely to occur.
7.
INPUT 1 EFFECTS knob
Use this knob to adjust the depth of the chorus, reverb or
chorus+reverb effect for the instrument connected to the
INPUT 1 jack.
Use this knob to select the effect type and adjust the effect
parameters. When this knob is fully turned to the left, all
effects are off.
8.
INPUT 2 jack
Connect your guitar to this jack.
Panel description and functions
3
9.
Use this switch to turn the overdrive circuit on for the
INPUT 2 channel.
10.
Use this knob to adjust the volume level of the guitar.
The CLIP indicator lights up if the volume level of the con-
nected guitar is too high. Clipping could distort the sound
and reduce the sound fidelity. To avoid clipping, use the
INPUT 2 VOLUME knob to adjust the volume.
11.
Use this knob to adjust the sound of the INPUT 2 channel.
BASS knob
Use this knob to adjust the sound in the low-frequency
range.
TREBLE knob
Use this knob to adjust the sound in the high-frequency
range.
12.
This knob adjusts the depth of the chorus, reverb or
chorus+reverb effect for the input connected to the INPUT
2 jack.
Turn this knob to select the effect type and adjust the effect
parameters. When this knob is fully turned to the left, all
effects are off.
13.
Adjusts the overall volume.
Tip
14.
Hold down the
indicator lights up). To turn off the amp, hold down the
button until the power indicator goes dark.
15.
Connect headphones to this jack. Adjust the output level of
this jack by using the MAIN VOLUME knob.
7
4
5
6
DRIVE
VOX Clubman 60
8 9
10
11
INPUT 2 DRIVE switch
As the gain is at a fixed setting, play using the pick or
adjust the volume on the guitar to get a distorted sound.
INPUT 2 VOLUME knob, CLIP indicator
INPUT 2 equalizer
Turning the knobs further to the right emphasizes the
tonal range corresponding to each knob. Note that too
much emphasis may produce feedback.
INPUT 2 EFFECTS knob
MAIN VOLUME knob
A limiter is built into the power amp section of this
unit. Playing with the MAIN VOLUME knob turned up
will create a compressed sound that stays clean. This
only works with the built-in speaker.
button, power indicator
button to turn on the power (the power
jack
When a device is connected to this jack, no sound will
be output from the internal speaker.
Be sure to connect a stereo mini plug to this jack.
7
14
12 13
15 16
Publicidad
