Publicidad
Idiomas disponibles
Idiomas disponibles
16.
AUX IN jack
Connect the analog output of an audio device to this jack.
This jack is a stereo mini jack.
The MAIN VOLUME knob as well as the equalizer and
effects knobs do not affect the sound of a device con-
nected to the AUX IN jack.
1.
Turn the MAIN VOLUME knob on the amp to the
minimum position.
2.
Connect the included AC adapter and power cord.
3.
Connect the DC plug of the AC adapter to the DC 19V
jack on the rear panel of the amp, and then connect the
plug of the power cord to an AC outlet.
4.
Secure the cord with the cord hook on the amp to
prevent the DC plug from being disconnected.
5.
Connect the cable from your guitar to the INPUT 1 or 2
jack.
If an audio player will be used, connect it to the AUX IN
jack.
6.
Hold down the
button until the power indicator lights
up and the amp turns on.
7.
Slowly raise the MAIN VOLUME knob to adjust the
overall volume.
Auto power-off function
The amp has an auto power-off function. With this function,
the amp automatically turns off if there is no operation or
input for approximately 4 hours. When the amp turns off,
operating a knob or switch does not turn it back on. After
the amp has turned off, turn it on again.
The auto power-off function cannot be disabled.
When there is input only to the AUX IN jack and when
the input level to the INPUT 1 or 2 jacks is either
extremely low or has barely changed, or if the VOLUME
knobs for the INPUT 1 and 2 jacks are at minimum, the
auto power-off function may activate.
Depending on the settings and environment, the amp
may interpret noise as input, even if there is no per-
formance, and the auto power-off function may not be
activated.
Setup
Specifications
Input/output jacks:
INPUT 1, 2: 1/4" phone jack (unbalanced)
AUX IN: 1/8" stereo mini phone jack
LINE OUT: 1/4" phone jack (unbalanced)
(Headphones): 1/8" stereo mini phone jack
Valve:
Nutube 6P1
Effects:
INPUT 1 channel
CHORUS, REVERB, CHORUS+REVERB
INPUT 2 channel
CHORUS, REVERB, CHORUS+REVERB
Equalizer:
INPUT 1 channel
BASS:
±10 dB@200 Hz
MIDDLE:
±7 dB@700 Hz
TREBLE:
±10 dB@3.5 kHz
INPUT 2 channel
BASS:
±10 dB@200 Hz
TREBLE:
±10 dB@3.5 kHz
Output power:
Approx. 50 W RMS (60 W Peak)
Speaker:
VOX Original 8" speaker with tweeter (2-way coaxial)
Power supply:
AC adapter (DC 19 V,
Current consumption:
3.42 A
Dimensions (W x D x H):
354 × 208 × 313 mm / 13.94"× 8.19" × 12.32"
Weight:
4.6 kg / 10.14 lbs.
Included items:
AC adapter (DC 19 V,
Manual
* Specifications and appearance are subject to change
without notice for improvement.
8
)
), power cord, Owner's
Publicidad
