Emos P5734 Manual De Instrucciones página 6

• The chime must be located in an easily accessible location for ease of
handling and unplugging.
• Periodically check the functioning of the doorbell button and replace the
battery in a timely manner. Use only quality alkaline batteries with the
prescribed parameters.
• When the doorchime is not used for a long time, remove the battery
from the button.
• Do not subject the button or chime to excessive vibrations and shocks.
• Do not subject the button or chime to excessive heat and direct sunlight
or moisture.
• When cleaning the chime, unplug it from the socket.
• To clean the device, use a slightly moistened cloth with a small amount of
detergent; do not use aggressive cleaning agents or solvents.
This device is not intended for use by persons (including children) whose
physical, sensory or mental disability or whose lack of experience or knowledge
prevents them from using it safely. Such persons should be instructed in how to
use the device and should be supervised by a person responsible for their safety.
Children must always be supervised to ensure they do not play with the device.
Do not dispose with domestic waste. Use special collection points for
sorted waste. Contact local authorities for information about collection
points. If the electronic devices would be disposed on landfill, dangerous
substances may reach groundwater and subsequently food chain, where it
could affect human health.
Hereby, EMOS spol. s r. o. declares that the radio equipment type P5734,
P5734B is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address:
http://www.emos.eu/download.
CZ | Bezdrátový zvonek
Soupravu tvoří tlačítko zvonku (vysílač) a domácí zvonek (přijímač). Zvonek
je určen k trvalému připojení k elektrické síti o napětí 230 V AC/50 Hz. Pře-
nos mezi tlačítkem a zvonkem zprostředkovávají rádiové vlny na frekvenci
433,92 MHz. Dosah závisí na místních podmínkách a je až 150 m ve volném
prostoru bez rušení.
Souprava má tzv. funkci „self-learning" – tlačítko má schopnost vygenerovat
vlastní párovací kód, který zvonek poté přijme a uloží si ho do paměti. Sestavu
tak lze rozšiřovat doplňkovými tlačítky. Díky funkci „self-learning" se také
neovlivňují sousední zvonky.
Pro správné použití bezdrátového zvonku si pečlivě prostudujte návod k použití.
6