Publicidad
Idiomas disponibles
Idiomas disponibles
11. PROBLEMS: CAUSES AND REMEDIES
1. Is there enough fuel?
2. Is the fuel valve on?
3. Is the engine turned on?
4. Does gas get to the carburetor?
To check, loosen the discharge handle with the fuel valve switched
on. The fuel flows easily. Tighten the discharge hose again.
ATENCIÓN: If fuel spills have occurred, check that the
area is perfectly dry before putting on the spark plugs or
starting the engine. Vapors or spills of fuel are flammable.
2
1
12. TECHNICAL CHARACTERISTICS
Model
Engine
Engine displacement (cc)
Power (hp)
RPM
Forward speed
Fuel tank capacity (l)
Oil sump tank (l)
Number of blades
Cutting diameter (mm)
Working width (cm)
Blades protector
Transport wheels
Handlebar
Other characteristics
Accessories included
Weight (kg)
5. Do the spark plugs generate spark?
A. Remove the pipe from the spark plugs. Remove dirt from the
support, then remove the spark plug.
B. Insert the spark plug into its connector
C. Start the engine
D. Ground the electrode by pulling on the anodol starter to check
for a spark.
If not, replace the cover. If yes, start the engine according to the
instructions.
6. If the engine still does not start, contact a Technical Service.
(1) Fuel valve
(2) Air valve (ON)
Petrol 4 stroke - EURO V
6 (mounted) blade screwed
110 (with mounted side discs)
Height and side adjustable
Air filter in oil, screwed cutters, ground
penetration 10cm
Lateral plant protection discs,
adjustable ridging plough, toolkit
11
700F
212
7
3.600
2 + R + 0
3,6
0,6
340
Yes
Front
86
EN
Publicidad
